Marathon Time Calculator

A marathon time calculator that works from what you already know: your pace per mile or per km, or a recent 5K, 10K or half marathon result. It returns the 26.2-mile finish time and the elapsed time at every major checkpoint, using TrainMath’s own pace code.

Quick answer

A marathon is 26.2188 miles (42.195 km), so finish time = pace × distance. At 9:00 per mile you finish in 3:55:58; at 10:00 per mile, 4:22:11; at 5:00 per km, 3:30:59. These times assume even pace on a correctly measured course. Enter your own pace or a recent race below.

Leave blank to skip. If filled, the result shows how far ahead of or behind the goal this pace finishes.

Result

Finish time
Average pace
Average speed
Compared with goal

Checkpoint times (even pace)

How long does a marathon take at my pace per mile?

Multiply your pace by 26.2188 miles: 8:00 per mile finishes in 3:29:45, 10:00 per mile in 4:22:11 and 12:00 per mile in 5:14:38. The full range below was computed with the same function the calculator uses.

Finish time = Fit.timeFromPace(pace per km, 42.195). Pace per km = pace per mile ÷ 1.60934. mph = 3600 ÷ seconds per mile.
Pace /milePace /kmFinish timemph
6:003:442:37:1910.00
6:304:022:50:259.23
7:004:213:03:328.57
7:304:403:16:388.00
8:004:583:29:457.50
8:305:173:42:527.06
9:005:363:55:586.67
9:305:544:09:056.32
10:006:134:22:116.00
10:306:314:35:185.71
11:006:504:48:245.45
11:307:095:01:315.22
12:007:275:14:385.00
12:307:465:27:444.80
13:008:055:40:514.62
13:308:235:53:574.44
14:008:426:07:044.29

How long does a marathon take at my pace per km?

Multiply your pace by 42.195 km: 4:00 per km finishes in 2:48:47, 5:00 per km in 3:30:59 and 6:00 per km in 4:13:10.

Same function, metric input. kph = 3600 ÷ seconds per km.
Pace /kmPace /mileFinish timekph
3:305:382:27:4117.14
4:006:262:48:4715.00
4:307:153:09:5313.33
5:008:033:30:5912.00
5:308:513:52:0410.91
6:009:394:13:1010.00
6:3010:284:34:169.23
7:0011:164:55:228.57
7:3012:045:16:288.00
8:0012:525:37:347.50

What pace do I need to break 3, 4 or 5 hours?

To break 4 hours you need 9:09 per mile or 5:41 per km; to break 3 hours, 6:51 per mile or 4:15 per km. Each row shows the slowest whole-second pace that still finishes under the barrier, and the finish time it produces.

Found by stepping whole seconds of pace and keeping the slowest one whose Fit.timeFromPace result is under the barrier (distance 42.195 km).
BarrierSlowest pace /mileFinish at that paceSlowest pace /kmFinish at that pace
Sub-3:00:006:512:59:364:152:59:20
Sub-3:30:008:003:29:454:583:29:34
Sub-4:00:009:093:59:545:413:59:48
Sub-4:30:0010:174:29:376:234:29:21
Sub-5:00:0011:264:59:467:064:59:35
Sub-5:30:0012:355:29:557:495:29:49
Sub-6:00:0013:435:59:388:315:59:22

Rounding matters at the barrier: 9:10 per mile looks almost identical to 9:09 on a watch, but over 26.2188 miles it finishes in 4:00:20.

Where should I be at 10K, halfway, 20 miles and 40K?

At an even 9:00 per mile you should pass 10K in 55:55, halfway in 1:57:59, 20 miles in 3:00:00 and 40K in 3:43:42. Use the row closest to your pace, or the calculator for your exact pace.

Elapsed time at each checkpoint = pace per km × checkpoint distance in km (20 miles = 32.1868 km). Even pace assumed.
Pace /mile10KHalf (21.1K)30K20 mi35K40KFinish
7:0043:301:31:462:10:292:20:002:32:142:53:593:03:32
8:0049:431:44:532:29:082:40:002:53:593:18:503:29:45
9:0055:551:57:592:47:463:00:003:15:443:43:423:55:58
10:001:02:082:11:063:06:253:20:003:37:294:08:334:22:11
11:001:08:212:24:123:25:033:40:003:59:144:33:244:48:24
12:001:14:342:37:193:43:424:00:004:20:594:58:165:14:38

How much does 10 seconds per mile change my marathon time?

Ten seconds per mile changes your marathon finish by 4:22, and ten seconds per km changes it by 7:02. This is why small pace drift in the first half adds up to minutes at the finish.

Time change = pace change × 26.2188 miles (per mile) or × 42.195 km (per km). Slower pace adds time; faster pace removes the same amount.
Pace changePer mile → finish changePer km → finish change
1 s+26 s+42 s
5 s+2:11+3:31
10 s+4:22+7:02
15 s+6:33+10:33
30 s+13:07+21:06

Can I predict my marathon time from a 5K, 10K or half marathon?

Yes, as an estimate: Riegel’s formula multiplies a 5K time by 9.5911, a 10K time by 4.6002 and a half marathon time by 2.0849. A 50:00 10K predicts 3:50:01; a 1:45:00 half predicts 3:38:55.

Predicted time = race time × (42.195 ÷ race km)1.06 (Riegel, 1981). Pace columns = predicted time ÷ marathon distance.
FromRace timePredicted marathonPace /milePace /km
5K20:003:11:497:194:33
5K25:003:59:479:095:41
5K30:004:47:4410:586:49
5K35:005:35:4112:487:57
10K45:003:27:017:544:54
10K50:003:50:018:465:27
10K55:004:13:019:396:00
10K1:00:004:36:0110:326:32
10K1:05:004:59:0111:247:05
Half1:30:003:07:397:094:27
Half1:45:003:38:558:215:11
Half2:00:004:10:129:335:56
Half2:15:004:41:2810:446:40

The half marathon is the most useful input because it is the closest distance. A 5K says more about speed than endurance, so the 5K row is the one most likely to be optimistic for runners without marathon-length training.

Worked examples (same code as the calculator)

9:00 per mile → finish time

  1. 540 s per mile ÷ 1.60934 = 335.54 s per km (5:36 per km)
  2. 335.54 × 42.195 = 14,158.2 s
  3. 14,158.2 s = 3:55:58

A steady 9:00 per mile finishes about four minutes under 4 hours.

1:45:00 half marathon → predicted marathon

  1. Distance ratio: 42.195 ÷ 21.0975 = 2
  2. 21.06 = 2.08493
  3. 6,300 s × 2.08493 = 13,135.1 s = 3:38:55 (8:21 per mile)

Plan around 3:39 as a best case, then check it against your long-run paces.

How does this marathon calculator work out finish time?

It multiplies your average pace by the marathon distance, or scales a recent race with Riegel’s formula. The table lists every formula and assumption the calculator uses.

ItemValue used
Marathon distance42.195 km = 26.2188 mi (World Athletics)
Mile1.60934 km
Finish from paceseconds per km × 42.195
Checkpoint timefinish seconds × checkpoint km ÷ 42.195
Race predictionT2 = T1 × (D2 ÷ D1)1.06
PacingEven pace from start to finish

Sources: marathon distance from World Athletics; prediction exponent from Peter S. Riegel, “Athletic Records and Human Endurance,” American Scientist 69(3), 285–290 (1981). Code: Fit.timeFromPace, Fit.paceViews and Fit.fmtTime in js/fitness.js. To go the other way, from a goal time to the pace and 5K splits, use the marathon pace calculator.

Limitations

  • GPS watches often measure a race as longer than 26.2 miles because runners rarely follow the shortest line, so the watch pace can look faster than your official average.
  • The tables assume even pace and steady conditions; hills, heat, wind and fuelling problems change real finish times.
  • Riegel predictions are estimates fitted on record performances, not a guarantee for any individual runner.

Disclaimer: Estimates for training planning only, not medical advice. Consult a professional.

FAQ

How long does it take to run a marathon at 10 minutes per mile?

Running a marathon at an even 10 minutes per mile takes 4:22:11 over 26.2188 miles, which is 6:13 per km. At that pace you pass the 10K mark in 1:02:08, halfway in 2:11:06 and 20 miles in 3:20:00.

What marathon time does a 5:00 per km pace give?

An even 5:00 per km pace gives a 3:30:59 marathon over 42.195 km, because 300 s × 42.195 km = 12,658.5 s. The same pace is 8:03 per mile and 12.00 kph.

What pace breaks a 4-hour marathon?

To break a 4-hour marathon at even pace you need 9:09 per mile or faster, which finishes in 3:59:54, or 5:41 per km, which finishes in 3:59:48. One second slower, 9:10 per mile, finishes in 4:00:20.

Can I predict my marathon time from a half marathon?

Yes, as an estimate: Riegel's formula, T2 = T1 × (D2 ÷ D1)^1.06, turns a 2:00:00 half marathon into a 4:10:12 marathon. It was fitted on record performances, so treat the result as a best case if your long runs are short, and expect heat, hills and fuelling to change it.

How is this different from the marathon pace calculator?

The marathon pace calculator starts from a goal time and gives the pace and 5K splits. This marathon time calculator starts from a pace or a recent race and gives the finish time, plus 10K, halfway, 30K, 20-mile, 35K and 40K checkpoint times.

Updated 2026-10-18.