Half Marathon Pace Calculator
Two-way half marathon pace calculator: goal time → pace per mile and per km, or pace → 13.1-mile finish time. Adds 5K, 10K, 15K and 20K checkpoint times and an optional negative-split plan, all computed with TrainMath’s own pace code.
Quick answer
A 2:00:00 half marathon is 9:09 per mile (5:41 per km). A 1:45:00 half is 8:01/mile (4:59/km); a 2:15:00 half is 10:18/mile (6:24/km). Going the other way, a steady 9:00 per mile finishes in 1:57:59 and 10:00 per mile in 2:11:06. Enter your own time or pace below.
Result
| Average pace | |
| Average speed | |
| Finish time | |
| Half-way plan |
Checkpoint times (even pace)
Pace per mile → half marathon finish time
| Pace /mile | Pace /km | Finish time | mph |
|---|---|---|---|
| 6:30 | 4:02 | 1:25:13 | 9.23 |
| 7:00 | 4:21 | 1:31:46 | 8.57 |
| 7:30 | 4:40 | 1:38:19 | 8.00 |
| 8:00 | 4:58 | 1:44:53 | 7.50 |
| 8:30 | 5:17 | 1:51:26 | 7.06 |
| 9:00 | 5:36 | 1:57:59 | 6.67 |
| 9:30 | 5:54 | 2:04:32 | 6.32 |
| 10:00 | 6:13 | 2:11:06 | 6.00 |
| 10:30 | 6:31 | 2:17:39 | 5.71 |
| 11:00 | 6:50 | 2:24:12 | 5.45 |
| 11:30 | 7:09 | 2:30:45 | 5.22 |
| 12:00 | 7:27 | 2:37:19 | 5.00 |
| 12:30 | 7:46 | 2:43:52 | 4.80 |
| 13:00 | 8:05 | 2:50:25 | 4.62 |
Pace per km → half marathon finish time
| Pace /km | Pace /mile | Finish time | kph |
|---|---|---|---|
| 4:00 | 6:26 | 1:24:23 | 15.00 |
| 4:30 | 7:15 | 1:34:56 | 13.33 |
| 5:00 | 8:03 | 1:45:29 | 12.00 |
| 5:30 | 8:51 | 1:56:02 | 10.91 |
| 6:00 | 9:39 | 2:06:35 | 10.00 |
| 6:30 | 10:28 | 2:17:08 | 9.23 |
| 7:00 | 11:16 | 2:27:41 | 8.57 |
| 7:30 | 12:04 | 2:38:14 | 8.00 |
Checkpoint times by goal: 5K, 10K, 15K, 20K
| Goal | 5K | 10K | 15K | 20K | Pace /km | Pace /mile |
|---|---|---|---|---|---|---|
| 1:30:00 | 21:20 | 42:40 | 1:03:59 | 1:25:19 | 4:16 | 6:52 |
| 1:40:00 | 23:42 | 47:24 | 1:11:06 | 1:34:48 | 4:44 | 7:38 |
| 1:45:00 | 24:53 | 49:46 | 1:14:39 | 1:39:32 | 4:59 | 8:01 |
| 2:00:00 | 28:26 | 56:53 | 1:25:19 | 1:53:45 | 5:41 | 9:09 |
| 2:15:00 | 32:00 | 1:03:59 | 1:35:59 | 2:07:59 | 6:24 | 10:18 |
| 2:30:00 | 35:33 | 1:11:06 | 1:46:39 | 2:22:12 | 7:07 | 11:27 |
Use these as check-ins, not targets to bank time: arriving at 10K a minute ahead of the column usually means the first half was too fast.
Negative-split plans (computed)
| Goal | Split | 1st half / 2nd half | Pace /mile, 1st / 2nd |
|---|---|---|---|
| 1:45:00 | even | 52:30 / 52:30 | 8:01 / 8:01 |
| 1:45:00 | 1% | 52:46 / 52:14 | 8:03 / 7:58 |
| 1:45:00 | 2% | 53:02 / 51:58 | 8:05 / 7:56 |
| 1:45:00 | 3% | 53:18 / 51:42 | 8:08 / 7:53 |
| 2:00:00 | even | 1:00:00 / 1:00:00 | 9:09 / 9:09 |
| 2:00:00 | 1% | 1:00:18 / 59:42 | 9:12 / 9:06 |
| 2:00:00 | 2% | 1:00:36 / 59:24 | 9:15 / 9:04 |
| 2:00:00 | 3% | 1:00:55 / 59:05 | 9:18 / 9:01 |
| 2:15:00 | even | 1:07:30 / 1:07:30 | 10:18 / 10:18 |
| 2:15:00 | 1% | 1:07:50 / 1:07:10 | 10:21 / 10:15 |
| 2:15:00 | 2% | 1:08:11 / 1:06:49 | 10:24 / 10:12 |
| 2:15:00 | 3% | 1:08:32 / 1:06:28 | 10:27 / 10:08 |
A 2% negative split on a 2:00:00 goal only asks you to start 6 seconds per mile slower than even pace and finish 5 seconds per mile faster — small enough to plan, large enough to stop an over-eager first 5K.
Worked examples (same code as the calculator)
Goal 2:00:00 → pace
- 7,200 s ÷ 21.0975 km = 341.27 s/km = 5:41 per km
- 341.27 × 1.60934 = 549.22 s/mile = 9:09 per mile
- Speed: 3600 ÷ 341.27 = 10.55 kph (6.55 mph)
Hold 9:09/mile; expect 56:53 at the 10K mat.
9:00 per mile → finish time
- 540 s/mile ÷ 1.60934 = 335.54 s/km (5:36 per km)
- 335.54 × 21.0975 = 7,079.1 s
- 7,079.1 s = 1:57:59
A steady 9:00/mile beats two hours by about one minute.
Formula & source
Finish seconds = pace (s/km) × 21.0975 = pace (s/mile) × 13.1094
Checkpoint at K km = finish seconds × K ÷ 21.0975
The half marathon is 21.0975 km, half the 42.195 km marathon distance used by World Athletics. Code: Fit.paceFromTime, Fit.timeFromPace, Fit.paceViews and Fit.splitTable in js/fitness.js. For mile-by-mile splits from a goal time, use the half marathon pace chart.
Limitations
- GPS distance often reads long on race day (tangents, tall buildings), so your watch pace may look faster than the official average.
- Hills, heat, wind and crowding change real pace; the tables assume steady conditions.
- This calculator does not predict what time you can run from another race distance — it converts between a goal time and a pace.
Disclaimer: Estimates for training planning only, not medical advice. Consult a professional.
FAQ
What pace do I need for a 2 hour half marathon?
A 2:00:00 half marathon needs an average of 9:09 per mile (5:41 per km) over 13.1094 miles. Our checkpoint table puts you at 28:26 at 5K, 56:53 at 10K, 1:25:19 at 15K and 1:53:45 at 20K.
What half marathon time does a 9 minute mile give?
Holding 9:00 per mile (5:36 per km) for the full 21.0975 km finishes in 1:57:59 — about a minute under two hours.
How do I calculate half marathon pace?
Divide your goal time in seconds by 13.1094 miles (or 21.0975 km). Example: 7,200 s ÷ 21.0975 km = 341.3 s per km = 5:41 per km. Going the other way, multiply your pace per km by 21.0975 to get the finish time.
What is a negative split in a half marathon?
Running the second half faster than the first. On a 2:00:00 goal, a 2% negative split means 1:00:36 for the first 10.55 km (9:15 per mile) and 59:24 for the second (9:04 per mile).
Is this different from the half marathon pace chart?
Yes. The pace chart turns a goal time into mile splits. This calculator works both ways — time to pace and pace to finish time — and adds 5K/10K/15K/20K checkpoint times and a negative-split plan.
Last updated: October 17, 2026.